Elasma Posture Corrector for Upper Spine with Rigid Inserts S-820 Size 2/Beige

Used for preventive purposes to prevent postural deformities, for the prevention and treatment of conditions such as: slouching, osteochondrosis, and scoliosis of the upper sections of the spine in the early stages.

Consult a doctor regarding the necessity of wearing the corrective device and the duration of its use. It is recommended to wear it over cotton clothing.
Put on the product as shown in the illustration on the consumer packaging.
Adjust and position the straps and belts, securing the corrective device around the waist with the Velcro fastener (if available).
In some cases, assistance may be needed when putting on or taking off the product.
When bending or during other physical activities, you may loosen the compression to a comfortable level.
Adjust the fit using the buckles and fastener.
Ensure that there are no folds in the clothing under the posture correction straps.

Elastic knitted fabric, composition: PAN - 61%, polyester - 15%, lycra - 24%

Allergic reaction to any component of the product; acute soft tissue infections.

CARE FOR THE MEDICAL DEVICE
Before washing the medical device, remove the rigid parts. Hand wash with neutral detergents at a temperature not exceeding +40°C. Fasten Velcro closures before washing. Dry at room temperature in a laid-out position. After drying, reinsert the stiffening ribs in their original place before the next use.

POTENTIAL SIDE EFFECTS OF USING THE MEDICAL DEVICE
Choosing the wrong size and type of posture corrector may cause bruising.

Medical elastic posture corrector for the upper spine with rigid inserts "ELASMA", model C-820.
Medical device manufactured according to TU 32.50.22-018-10434277-2018.

Size 2
Body circumference at the level of the armpits 80-89 cm
Color beige

PURPOSE OF THE MEDICAL DEVICE
Designed for the prevention and treatment of spinal deformities through compression correction of the cervical, thoracic, lumbar, and sacral regions of the spine.
Recommended for developing skills for physiologically correct posture in adults and children.
To relieve painful muscle tension in the thoracic and cervical regions of the spine during prolonged loads and deformations in a sitting position. It is a reusable orthopedic device.

TECHNICAL CHARACTERISTICS

Stretchability, %, at least 80
Surface density, g/m2, at least 400
Tensile strength, N, at least 147.0
Residual deformation, %, no more than 10.0
Shrinkage after washing, %, no more than 10.0
Working stretchability, %, no more than 20
Tensile elongation, % At least the value of stretchability
Tensile elongation after washing, % no more than the value before washing 20

DETERMINING THE SIZE OF THE MEDICAL DEVICE
It is very important to choose the correct size to ensure optimal effect and proper service life of the product. A properly fitted corrector should not slip, press, or cause other unpleasant sensations.

The medical elastic posture corrector for the upper spine with rigid inserts "ELASMA", model C-820, size range: 1, 2, 3, 4, 5, 6, 7 is suitable for patients with a body circumference at the level of the armpits from 70 to 135 cm.

Size chart:
Size 1 - Body circumference at the level of the armpits 70-79 cm
2 - Body circumference at the level of the armpits 80-89 cm
3 - Body circumference at the level of the armpits 90-99 cm
4 - Body circumference at the level of the armpits 100-109 cm
5 - Body circumference at the level of the armpits 110-119 cm
6 - Body circumference at the level of the armpits 120-127 cm
7 - Body circumference at the level of the armpits 128-135 cm