Metal crutches for adults 2 pcs.

Crutches with axillary support are intended for additional support and to facilitate the movement of individuals with injuries and diseases of the lower extremities.

Fitting Axillary Crutches
The selection of axillary crutches is based on the patient's height.
This takes into account the distance from the tip of the crutch to the point where it rests in the armpit, as well as the position of the handle that the hand grips.

How to fit axillary crutches by height:
The patient should stand and wear their usual shoes.
The crutch should be positioned about 20 cm from the foot.
Measure the distance from the armpit to the top of the crutch - with proper fitting, it should be within 5 cm.
With relaxed arms, the crossbar that the palm grips should be approximately at wrist level.
To adjust it correctly, bend the arm at the elbow at a 30° angle, with the palm clenched into a fist.
If the patient still needs support to stand, the crutch can be selected using the following formula: height minus 40 cm.
However, in this case, the crutch will need to be adjusted.
To determine if the crutches are properly fitted, the patient should try walking with them.
If shoulder pain develops over time while moving, this indicates that the crutches are too high.
If the shoulders are relatively relaxed but there is fatigue in the arms, it means the crutches are too low.

The supports and legs of the crutches are made of steel rolled stock, the axillary pad and handle are made of wood or plastic.
A powder coating is used as a protective finish.
The rubber tip has an inner diameter of 19 mm and an outer diameter of 40 mm.

• Severe disturbances of posture and coordination of movement.

• Severe disorders of the vestibular apparatus.

• Loss of functionality of the upper limbs.

• Psychiatric disorders.

• Narcotic or alcohol intoxication.

METAL CRUTCHES FOR ADULTS - Article: 16(540), Aversus

Crutches with axillary support are designed to provide additional support and facilitate movement for individuals with injuries and conditions of the lower limbs.
To adjust the height of the crutch handle, it is necessary to: disassemble the bolt connection of the handle with the uprights, reposition the handle to the desired height, and reassemble the bolt connection. The step for repositioning the handle is 35 mm.
To adjust the height of the crutch leg, it is necessary to: disassemble the bolt connection of the leg with the uprights, reposition the leg to the desired height, and reassemble the bolt connection. The step for repositioning the leg is 35 mm.
The weight of a pair of crutches is 2.50 kg.
They can support a load of up to 150 kg.
Height adjustment range of the crutch:
Height of the crutch from the floor to the axillary support: MIN 1180 mm, MAX 1425 mm.

Metal crutches for adults are designed to provide additional support and facilitate movement for individuals with injuries and conditions of the lower limbs. The shafts and legs of the crutches are made from steel, while the underarm support and handle are made of wood or plastic. The weight of a pair of crutches is 2.50 kg. They can support a load of up to 150 kg. The height adjustment range of the crutch is as follows:
Height of the crutch from the floor to the underarm support: MIN 1180 mm, MAX 1425 mm.
Handle adjustment increment - 35 mm.
Leg adjustment increment - 35 mm.
The selection of designs with underarm support is based on the patient's height. This takes into account the distance from the tip of the crutch to the point where the product rests against the underarm, as well as the position of the handle held by the hand. It is recommended to consult a doctor before purchasing crutches.