Okuprin AquaOptic Multi-Purpose Solution for Contact Lens Care 120 ml

Daily cleaning, removal of protein deposits, rinsing, disinfection, storage of contact lenses.

Cleaning / Removal of Protein Deposits
Fill the lens storage container with fresh AquaOptic solution. Remove the lens from the eye, place it on the palm, and moisten it with a few drops of the solution. Gently wipe the lens with your index finger.
Rinsing / Disinfection / Storage
Thoroughly rinse both surfaces of the lens with fresh solution. Place the lens in the appropriate compartment of the container. Add fresh AquaOptic solution to the compartment. The lens must be completely submerged in the solution. Close the compartment with the lid. Repeat the same operation with the second lens. Leave the lenses in the closed container overnight or for at least four hours (this time allows for complete cleaning). Before wearing the lenses, rinse them thoroughly with the solution to complete the cleaning process. Pour out the solution from the container and rinse it with fresh solution. Do not close the container with lids; allow it to dry. After that, close it. The container will be ready for use again.
Moisturizing
If there is a feeling of dryness or discomfort in the eyes, it is recommended to remove the lens, apply 1-2 drops of AquaOptic solution to its surface, and put it back on. The solution can also be instilled directly onto the eyes without removing the lenses, using 1-2 drops, then gently close and reopen the eyes, allowing the lenses to be moistened with the solution.
For eye moisturizing, it is also recommended to use preservative-free ophthalmic moisturizing solutions based on hyaluronic acid.
If discomfort persists, it is necessary to remove the contact lenses and consult a doctor.

Precautions for Use
It is essential to follow the lens care instructions recommended by the doctor. Failure to comply with the instructions may lead to serious eye diseases.
Do not use the solution in case of hypersensitivity to its components.
Do not add fresh solution to the container with already used solution.
It is unacceptable to use water for lens care.
Always wash hands thoroughly before handling lenses and solution.
To avoid contamination of the solution, do not allow the tip of the bottle to come into contact with foreign objects.
If the lenses are not used for an extended period, they may be stored in a closed container with solution for no more than 30 days.
The bottle with the solution must be kept tightly closed.
Do not use the solution if the packaging integrity is compromised.
It is recommended to replace the container every 1-3 months.

Composition per 1 ml: boric acid - 11.0 mg; sodium chloride - 3.0 mg; disodium tetraborate decahydrate (borax) - 1.15 mg; trehalose - 0.2 mg; disodium edetate dihydrate - 0.2 mg; sodium hyaluronate - 0.1 mg; polyhexamethylene biguanide hydrochloride (20% solution) - 0.005 mg; poloxamer 407 - 0.03 mg; succinic acid - 0.03 mg; water for injection - up to 1 ml.

Increased sensitivity to the components of the solution.

Not applicable to products that can affect a person's psychomotor state.

Procedure for disposal
It is permissible to dispose of the product (including unused solution) in accordance with SanPiN 2.1.3684-21 as Class A waste (epidemiologically safe waste, composition similar to solid municipal waste).

Allergic reactions may occur.

OKUPRIN (Okupin) AQUAOPTIC MULTIFUNCTIONAL SOLUTION FOR CONTACT LENS CARE / ERKAPHARM - area of application - ophthalmology (as prescribed).
Appearance and properties: a clear or slightly opalescent colorless solution.

INDICATIONS
The solution is intended for daily care of all types of contact lenses and provides cleaning, removal of protein deposits, rinsing, disinfection, and storage of contact lenses for prolonged comfortable wear.
The solution is suitable for particularly sensitive eyes.

PROPERTIES AND EFFICACY
Thanks to a special moisturizing complex containing a natural component - sodium hyaluronate (hyaluronic acid), the AquaOptic solution ensures smooth lens movement across the corneal surface, prolonged optimal hydration, and comfort. Sodium hyaluronate is a physiological polysaccharide compound found in both the eye tissues and other tissues and fluids of the human body. A unique physicochemical property of sodium hyaluronate molecules is their pronounced ability to bind water molecules. When using the AquaOptic solution, a thin film forms on the lens surface, protecting the eyes from drying out and irritation. The protective film's action begins almost immediately, thus keeping the eyes protected from the sensation of dryness for a long time.
The effective cleaner poloxamer 407 binds protein deposits, preventing their formation on the lenses.
The polyhexamethylene biguanide hydrochloride included in the AquaOptic solution has a disinfecting action, protecting the eyes and contact lenses from pathogenic microflora.
Succinic acid has pronounced anti-hypoxic and antioxidant effects; in the AquaOptic solution, succinic acid reduces the risk of developing hypoxic complications associated with wearing contact lenses.
Trehalose is a naturally occurring substance found in a variety of organisms. The unique feature of trehalose is its protective role concerning cell membranes in the anhydrobiotic mechanism of plants and microorganisms (a state of slowed metabolism that allows them to survive in dehydrated conditions). Due to its physicochemical characteristics, trehalose complements the moisturizing, antioxidant, and protective properties of the solution.

MAIN TECHNICAL AND FUNCTIONAL CHARACTERISTICS OF THE MEDICAL DEVICE
The multifunctional solution for contact lens care AquaOptic is produced according to TU 21.20.23-008-64260974-2017, complying with international and national standards.
The primary packaging of the product and the lens container meet ISO 9001, ISO 13485 standards.
In terms of biological safety, the product meets the requirements of the series of GOST ISO 10993 standards. The medical device is non-toxic.
The solution is sterile. The solution is bottled in aseptic conditions into sterile bottles in accordance with GOST R ISO 13408-1. The osmolality of the solution should be 200 - 400 mOsm/kg, pH - 6.5 - 7.8, viscosity - 1 - 3 mPa∙s. The product must maintain functionality at temperatures from +32 °C to +42 °C according to GOST R 50444.

REQUIREMENTS FOR THE USE AND OPERATION OF THE MEDICAL DEVICE
The product is recommended for individual use.
This medical device is intended for self-application at home, as well as for use in healthcare and preventive institutions.

After opening the bottle - 6 months.
Do not use after the expiration date!