Quick-setting medical plaster bandage 20 cm x 3 m

For the application of external splints, plaster casts, for the manufacture of splints, etc.

Preparation of the product for use:
Prepare a container with water. It is recommended to use water at room temperature (approximately 20 degrees Celsius). The depth of the water container for soaking should ensure complete vertical immersion of the roll.
Procedure for use:
After removing the packaging from the bandage, without releasing the bandage from your hand, immerse it in water, preferably vertically, to ensure complete and rapid expulsion of air from the roll. Keep it in the water for no less than 20 seconds and no more than 60 seconds.
Attention: Complete wetting of the bandage occurs within 20-50 seconds.
Reducing the soaking time leads to a deterioration in the quality of the finished plaster cast.
Remove the bandage from the water vertically, gently squeezing it, without worrying that the plaster mixture will leak out. The necessary amount of plaster will still remain on the bandage. Lay the plaster bandage on a flat surface, smoothing each layer with slight pressure for even distribution of the plaster composition.
The setting time, after which modeling and adding water is not permissible, is 1.5-2 minutes after soaking. Initial strength occurs within 2-4 minutes for fast-setting bandages and within 5-10 minutes for standard bandages. After 30 minutes, the main strength is achieved for the wet plaster cast. Final strength occurs after complete drying of the water from the plaster cast.
The time for complete drying depends on environmental conditions and the body temperature to which the cast is applied.

It should be remembered!!!
Weak squeezing (leaving a large amount of water in the roll) during soaking leads to slightly extended setting and drying times; strong squeezing (a small amount of water) leads to difficulties in modeling.

bleached gauze, medical plaster.

Allergic reactions to the components of the product

Gypsum bandages should be stored in accordance with GOST 7000 in dry, well-ventilated areas at least 1 meter away from heating appliances, and must be protected from sunlight and atmospheric effects.
Gypsum bandages are highly hygroscopic, therefore they should be stored in conditions that prevent moisture.
It is recommended to unpack them immediately before applying the bandage.
Disposal:
Used products are classified as Class A waste and should be disposed of in accordance with SanPiN 2.1.7.2790-10 "Sanitary and Epidemiological Requirements for the Handling of Medical Waste" (approved by the decree of the Chief State Sanitary Doctor of the Russian Federation dated December 9, 2010, No. 163).
Products that have expired or have lost their commercial appearance should be disposed of with household waste.

MEDICAL QUICK-SETTING GYPSUM BANDAGE - consists of strips of medical gauze impregnated with high-quality medical gypsum. The gypsum distributed on the gauze is secured with a bacteriostatic material that is indifferent to the body.
Base: bleached gauze without seams and tears.
For stability during use, it has an internal plastic rod.
The gypsum bandage is a single-use product.
Medical gypsum bandages are available in two types: standard and quick-setting.

CHARACTERISTICS:
Type size: 20 cm x 3 m
Surface density, g/m²: not less than 300, but not more than 700
Gypsum composition shedding, %: not more than 10
Wet time for gypsum bandages, s: not more than 20
Washing out level of gypsum composition, %: not more than 10
Time to form a stable shape of the rectangular model dressing, min: quick-setting: not less than 2, but not more than 4
Quantity in packaging: 1 pc
Type of packaging: polypropylene film
Shelf life: 3 years

INDICATIONS:
Medical gypsum bandages are intended for applying external splints, gypsum dressings in case of fractures, for making splints, immobilization in the treatment of bone and joint diseases, in soft tissue injuries, and in other cases where the application of a fixing gypsum dressing is required, as well as for making casts of limbs in orthopedics.

AREA OF APPLICATION:
Medical gypsum bandages can be used in inpatient and outpatient medical institutions.

Medical quick-setting plaster bandage 20 cm x 3 m - consists of strips of medical gauze impregnated with high-quality medical plaster. The plaster distributed on the gauze is secured with a bacteriostatic material indifferent to the body. The plaster bandage is a single-use product.

Medical plaster bandages are intended for applying external splints, plaster casts in case of fractures, for making splints, immobilization in the treatment of bone and joint diseases, in soft tissue injuries, and in other cases where a fixing plaster bandage is required, as well as for making molds of limbs in orthopedics.

Medical plaster bandages can be used in inpatient and outpatient medical facilities.