Insulin syringe 3-component 40 IU 1 ml 10 pcs/import/sfm

used for insulin injections

1. Unpacking the syringe vial - twist the cap until the seal breaks, then remove the cap;
2. Unpacking the needle - twist the cap until the seal breaks, then remove the cap, pulling it straight off;
3. Correct dosage - align the upper edge of the syringe vial with the scale division according to your dose.
Injection technique:
It is necessary to form a skin fold, as there is a high risk of injecting insulin intramuscularly (detailed instructions for use and injection technique are provided on each individual syringe packaging).

Cylinder and piston material - medical polypropylene
Piston seal (gasket) does NOT contain latex
Sterilization: ethylene oxide, CE marking

Individual intolerance to the materials of the product.

Safety measures:
Patients mixing two types of insulin MUST NOT:
-change the prescribed mixing sequence as directed by the physician,
-change the model or brand of syringes or needles without prior consultation with the treating physician.
Use syringes exclusively for their intended purpose, i.e., only for the administration of medications.
For single use only.
After use, dispose of the needle and syringe properly as waste.

Brand: SFM Hospital Products GmbH (Germany)
Insulin Injection Syringe SFM 1.0 ml (U-40 scale) - used for insulin injections
- Sterile. Sterile, apyrogenic, non-toxic, single-use.
- Disposable
- Three-component with a rubber gasket on the piston to ensure exceptional smoothness of drug administration (the black gasket also allows for controlling the withdrawal of the medication to the required volume);
- Painlessness of injection is due to the easy sliding of the piston, without friction.
Needle 29G (0.33 mm x 12.7 mm) (stainless steel) - integrated (soldered into the syringe), recommended for use by adults and children with excess weight.
- Non-sterile graduation (clear, contrasting) - contributes to maximum dosing accuracy;
- Graduation on the syringe is in insulin units and allows for easy reading of the measurements.
- Protective caps have color coding corresponding to the concentration of insulin and the scale;
- Cap color coding is red
- Each syringe is protected by two plastic caps on the top and bottom - for convenience of storage and use for any purpose (the sterility of the syringe is maintained until the caps are removed);
- The retaining ring on the piston prevents loss of medication.
- U-40 scale - 40 units,
- Scale increment - 1 unit
- The cylinder is fully transparent, providing excellent visualization of the contents of the syringe;
Reusing syringes and needles is prohibited.
Sterility is compromised when the cap is removed from the needle.
The absence of dead space guarantees the administration of the full dose without loss of medication.
Packaging - polybag

The 3-component insulin syringe (40 IU/1 ml) is a medical instrument designed for insulin injections. The sterile syringe has a volume of 1 ml. The needle 29G (0.33 mm x 12.7 mm) (stainless steel) is integrated (bonded to the syringe) and is recommended for use by adults and children with excess weight. The non-sterile graduation on the syringe (clear, contrasting) facilitates maximum dosing accuracy. The graduation on the syringe is marked in insulin units and allows for easy reading of the measurements.
Scale U-40 - 40 insulin units. Scale increment - 1 insulin unit. The cylinder is fully transparent, providing excellent visualization of the syringe contents.
Reusing syringes and needles is prohibited. Sterility is compromised when the cap is removed from the needle. The absence of dead space ensures the full dose is administered without loss of medication.
The package contains 10 syringes. The product meets all international quality and safety standards. The 3-component insulin syringe (40 IU/1 ml) is an indispensable assistant in the treatment of diabetes.