Syringe 2 ml three-part sterile single-use with luer and needle 0.6x30 mm 100 pcs/box Elets

Intended for subcutaneous, intramuscular, intravenous administration of medicinal products.

Method of use (instructions for use):
Disinfect the skin at the injection site. Disinfection should be performed with ethyl or methyl alcohol.
The scale division allows for the precise dosage of the medicinal substance.
1. Before use, visually inspect the integrity of the consumer packaging. It is prohibited to use a syringe from damaged packaging.
2. Check the expiration date of the product. The use of the product after the expiration date is prohibited.
3. Open the individual packaging and remove the syringe.
4. Firmly attach the needle to the syringe cone and remove the cap.
5. Draw the medicinal preparation into the syringe.
6. Hold the syringe with the needle pointing vertically upward and expel air bubbles by pressing on the plunger.
7. Administer the injection.
8. After the injection, remove the needle from the syringe and place it in a container for the collection and disposal of needles.
9. Dispose of the syringe and needle.

Material of manufacture:
Syringe cylinder: medical polypropylene
Piston rod, rod: medical polypropylene/polyethylene.
Seal (gasket): PVC.
Lubricant: polymethylsiloxane liquid.
Piston seal does NOT contain latex.

There are no absolute contraindications for the use of the injection syringe, except in cases of individual intolerance to the components of the product.

Sites for safe intramuscular injections: upper outer quadrant of the buttock, middle third of the anterolateral surface of the thigh, and upper third of the outer surface of the arm.
Choosing the correct length and thickness of the needle is an important and significant factor when administering medications intramuscularly, subcutaneously, or intravenously. The size of the needle is selected based on the following indicators:
1) Physical condition of the person (weight, gender, age, height).
2) Injection sites.
3) Depending on the concentration and composition of the medication.

• Brand: MPK Elets
• Injection syringe for single use, three-part, sterile, with a single-use injection needle, capacity 2 ml "Luer".
• Sterile, apyrogenic, non-toxic.
• Single use.
• Three-part.
• Conical connection of the cylinder with the injection needle - Luer type.
• Luer-lock position (cylinder cone) of the syringe - concentric.
• Finger grips on the cylinder and piston with anti-slip texture.
• Clear, indelible graduation.
• Needle 23G (0.6x30 mm) - included.
• The needle tip is sharpened in three planes (laser three-level sharpening), ensuring that the puncturing effect predominates over the cutting effect during tissue penetration.
• Minimal force required for puncture.
• Longitudinal resistance to bending (elasticity).
• Strength, stability of connections with the syringe.
• Syringe volume 2 ml.
• Scale division - 0.2.
• The stop ring prevents accidental withdrawal of the piston from the cylinder and leakage of medication for intramuscular injections.
• The piston does not contain natural latex, eliminating the risk of allergic reactions.
• Individual sterile blister packaging - dense gas-permeable paper and transparent thermoformable film.
• The total capacity of the syringe exceeds the nominal capacity by at least 10%.
• The transparent cylinder facilitates control of the volume and clarity of the medication.
• Individual packaging ensures the preservation of sterility.
APPLICATION:
Field of application: used in medical and preventive institutions of any profile and in home settings.
Safety and precautionary measures:
• Before use, check the integrity of the packaging. The use of opened or damaged sterile packaging is not allowed. Do not use the product for unintended purposes.
• The syringe is intended for single use only and should be administered immediately after opening the packaging. Used needles and syringes are prohibited from being reused. Re-sterilization is not allowed.
• It is prohibited to perform injections with the same needle or syringe, changing only the needles, on multiple patients. After use, do not replace the protective cap on the needle. After use, the needle must be placed in a container for needle collection and disposal.
Conditions of use: the syringe is intended for use immediately after filling and is not designed for prolonged storage of the injected liquid.

The 2 ml three-part syringe is a medical device used for injections. The sterile injection syringe comes in individual packaging and is intended for single use. It is made from high-quality and safe material. The needle 23G (0.6x30 mm) is detachable and included. The needle does not damage tissues upon insertion due to a special lubrication coating. The transparent cylinder facilitates the control of the volume and clarity of the medication. The scale division is 0.2. The position of the Luer lock (the cone of the cylinder) is concentric. The syringes have high accuracy and allow for precise dosage control. Individual packaging ensures the preservation of sterility. Three-component syringes are a reliable and convenient tool for performing medical procedures at home or in medical facilities.