Vogt Medical syringe 5(6)ml 3-component with needle (0.7x30 mm) 22g 10 pcs.

Intended for injections - for subcutaneous, intramuscular, and intravenous administration of various liquid medicinal products.

1. Open the blister pack of the syringe at the location indicated by the arrow and marked "open here." Carefully separate the paper from the polyethylene film using both hands.
2. Attach the needle to the syringe by placing the needle onto the syringe connector. Remove the protective cap from the needle.
3. Carefully insert the syringe needle into the liquid medication and, holding the cylindrical body of the syringe and the upper support platform, smoothly pull the syringe plunger to draw the required volume of medication.
4. Raise the syringe with the connector facing up and gently push the plunger to expel the air.
5. If air bubbles remain in the syringe cylinder, remove them by lightly tapping the cylinder with your finger while keeping the syringe connector facing up. Remove any remaining air with an additional smooth forward movement of the plunger.
6. Disinfect the injection site with an antiseptic and allow the skin to dry.
7. Administer the medication to the patient via injection.
8. Dispose of the used syringe and needle in a designated container for the collection and disposal of used medical instruments.

Material of manufacture:
body, piston: medical polypropylene
seal: medical rubber, latex-free
lubricant: silicone oil
Material of the needle cannula – stainless steel.

Brand: Vogt Medical
Vogt Medical Injection Syringe 5(6) ml
Single-use medical syringe 5 ml, three-component injection for single use with a pre-attached needle.
Syringes are supplied in a three-component design – cylinder, piston, seal.
-Sterile
-Single-use
-Three-component
Needle 22G (0.7x30 mm) - removable, pre-attached to the syringe
The outer side of the cylinder features a clear, non-erasable volume graduation scale, with an additional volume of 1.0 ml for mixing solutions. The distal end of the syringe is equipped with a Luer-Slip type cannula, with an eccentric cone position.
The inner part of the proximal end of the cylinder has a stop ring.
Injection needle 22G (0.7 mm) length 30 mm, thin-walled, with a three-faceted laser sharpening and silicone coating. Syringe components are latex-free. The color coding of the needle (black) complies with the requirements of the international standard ISO 6009. The cannula material is stainless steel. Packaging is individual and sterile. The packaging bears the latex-free symbol. The product is non-toxic, apyrogenic, and sterilized with ethylene oxide.
-Transparent cylinder facilitates control of volume and clarity of the medication
-Individual packaging ensures the preservation of sterility.