2 ml 2-component syringe with needle 23g 100 pcs/import/sfm

for subcutaneous, intramuscular, and intravenous administration of medicinal substances.

1. Before use, check the expiration date of the syringe indicated on the packaging and the integrity of the consumer packaging. Do not use after the expiration date or if the medical syringe packaging is compromised. Sterile until opened.
2. Open the individual packaging of the syringe. Remove the syringe.
3. Hold the syringe and remove the protective cap from the needle.
4. Holding the cylindrical body, gently pull the plunger of the syringe to draw the required volume of the medication.
5. Raise the syringe and gently push the plunger to expel air.
6. If air bubbles remain in the syringe cylinder, remove them by lightly tapping the cylinder with your finger while holding the syringe with the tip facing up.
7. Remove any remaining air from the cylinder and connector with an additional smooth forward movement of the plunger.
8. Thoroughly disinfect the skin at the injection site with a swab soaked in disinfectant solution.
9. Administer the medication according to the instructions.
10. After the injection, press the puncture site with a swab soaked in disinfectant solution, cover the needle with the cap. Dispose of the syringe. Be cautious of accidental needle stick with the used needle.

Cylinder and piston made of polypropylene
Needle 23G/0.6mm x 30mm
Protective cap

Individual intolerance to the materials of the product

Brand SFM
The SFM Hospital Products GMBH 5 ml two-component syringe is a medical device used for injections.

Characteristics:
• Volume - 2 ml
• Two-component
• Sterile
• Single-use
• Individually packaged
• Made from high-quality and safe material
• Removable needle included
• Needle size 23G (0.6x30 mm)
• Syringe-needle connection - Luer-slip type
• Position of the Luer fitting (cylinder cone) of the syringe - coaxial (located at the center of the syringe cylinder)
• Transparent cylinder facilitates control of volume and clarity of the medication
• Graduation is clear, contrasting, black in color, which contributes to maximum dosing accuracy
• Durable double locking ring prevents accidental withdrawal of the plunger during medication intake
• Individual sterile blister packaging with a folded edge

The SFM Hospital Products GMBH two-component syringes are single-use sterile syringes used for subcutaneous, intramuscular injections, and other therapeutic and diagnostic procedures.
The syringe is made from special polypropylene and consists of two parts: the cylinder and the plunger, and comes with a needle.
The painlessness of the injection is ensured by the smooth sliding of the plunger, without friction.
The needle does not damage tissues upon insertion due to a special lubrication coating.
Individual sterile blister packaging with a folded edge - dense medical paper and transparent film (film composition - polyethylene).

The two-component syringe with a volume of 2 ml is a medical device used for injections. The sterile injection syringe comes in individual packaging and is intended for single use. It is made from high-quality and safe material. The needle 23G (0.6x30 mm) is detachable and included. The needle does not damage tissues during insertion due to a special lubrication coating. The position of the Luer lock (cone of the cylinder) of the syringe is coaxial (located at the center of the syringe cylinder).

The transparent cylinder facilitates the control of the volume and clarity of the medication. The syringes have high accuracy and allow for precise dosage control. Individual packaging ensures the preservation of sterility. Two-component syringes are a reliable and convenient tool for performing medical procedures at home or in medical institutions.