3 ml 3-component syringe 10 pcs/import/sfm/individually packaged

Intended for the injection of medicinal products.

1. Check the integrity of the individual packaging and the presence of manufacturing defects.
2. Ensure that the expiration date of the syringe has not passed.
3. Open the individual packaging and remove the syringe.
4. Firmly attach the needle to the syringe tip if it is not already attached. Check the tightness of the connection between the needle and the syringe.
5. Adjust the position of the plunger to the zero mark.
6. Remove the protective cap from the needle. The needle should not come into contact with the skin or other non-sterile objects.
7. Draw the medication into the syringe.
8. Hold the syringe vertically, with the needle pointing upwards, and expel any air bubbles by pressing on the plunger.
9. Administer the injection.
10. After the injection, place the protective cap back on the needle and dispose of the syringe with the needle properly.

Material of manufacture:
Cylinder: medical polypropylene
Piston: polypropylene
Piston seal: synthetic rubber
Lubricant: silicone oil

Individual intolerance to the materials of the product

Safety measures:

• there should be no lint when opening the packaging to ensure additional safety during drug administration;

• visually check the integrity of the container;

• using a syringe from damaged consumer packaging is prohibited

Brand: SFM Hospital Products GmbH
Sterile Single-Use Injection Syringe SFM Hospital Products GmbH 3 ml
- Sterile
- Single-use
- Three-component

Needle 23G (0.6x30 mm) - detachable, mounted on the syringe
- The injection needle has a three-faceted tip that ensures easy and comfortable tissue penetration
- The connection between the syringe and needle is of the Luer type
- The position of the Luer lock (cylinder cone) of the syringe is concentric
- The needle surface becomes smooth due to polishing and grinding, as well as a special lubricant coating. The needle does not damage tissues upon insertion
- The thin-walled design of the needle allows for comfortable administration of viscous and oily medications
- Syringe volume: 3 ml
- The scale is graduated up to 3 ml
- The stop ring prevents accidental withdrawal of the plunger from the cylinder and leakage of medication for intramuscular injections
- Packaging: blister
- The total capacity of the syringe slightly exceeds the nominal volume (by at least 10%)
- The transparent cylinder facilitates control of the volume and clarity of the medication
- Individual packaging ensures the preservation of sterility. Non-toxic, apyrogenic

The 3 ml three-component syringe is a medical device used for injections. The sterile injection syringe comes in individual packaging and is intended for single use. It is made from high-quality and safe material. The needle 23G (0.6x30 mm) is detachable and mounted on the syringe. The needle does not damage tissues during insertion due to a special lubrication coating. The conical connection of the cylinder with the injection needle is of the Luer type. The position of the Luer fitting (the cone of the cylinder) of the syringe is concentric, meaning the tip-cone is centered on the syringe cylinder.

The transparent cylinder facilitates the control of the volume and clarity of the medication. The total capacity of the syringe slightly exceeds the nominal volume. The syringes have high accuracy and allow for precise dosage control. Individual packaging ensures the preservation of sterility. Three-component syringes are a reliable and convenient tool for performing medical procedures at home or in medical institutions.