Insulin syringe 1 ml 100 units with needle 26g (0.45x12 mm) 100 pcs/box/premier-med/

Intended for insulin injection.
Field of application: used in healthcare and preventive institutions of any profile and in home settings.
Safety and precautionary measures:
• Before use, check the integrity of the packaging. The use of opened or damaged sterile packaging is not permitted. Do not use the product for unintended purposes.
• The syringe is intended for single use only and should be administered immediately after opening the packaging. Used needles and syringes are prohibited from being reused. Re-sterilization is not allowed.
• It is prohibited to perform injections with the same needle or syringe, changing only the needles, for multiple patients. After use, do not replace the protective cap on the needle. After use, the needle must be placed in a container for the collection and disposal of needles.

Conditions of use: the syringe is intended for immediate use after filling and is not designed for prolonged storage of the injected liquid.
6. Procedure for use (instructions for use):
Disinfect the skin at the injection site. Disinfection of the skin should be performed with ethyl or methyl alcohol. The scale division allows for the precise setting of the required dose of the medicinal substance.
1. Before use, visually inspect the integrity of the consumer packaging. The syringe from damaged packaging must not be used.
2. Check the expiration date of the product. The use of the product after the expiration date is prohibited.
3. Open the individual packaging and remove the syringe.
4. Firmly attach the needle to the syringe cone and remove the cap.
5. Draw the medicinal preparation into the syringe.
6. Hold the syringe with the needle pointing vertically upwards and expel air bubbles by pressing on the plunger.
7. Administer the injection.
8. After the injection, remove the needle from the syringe and place it in a container for the collection and disposal of needles.
9. Dispose of the syringe and needle.

Material of manufacture:
Syringe cylinder: medical polypropylene.
Piston rod, rod: medical polypropylene.
Seal (gasket): PVC.
Lubricant: polymethylsiloxane liquid.
Piston seal does NOT contain latex.

Individual intolerance to the materials of the product

Sites for safe intramuscular injections: upper outer quadrant of the buttock, middle third of the anterolateral surface of the thigh, and upper third of the outer surface of the arm.
The correct choice of needle length and gauge is an important and significant factor in intramuscular, subcutaneous, or intravenous administration of medications. The size of the needle is selected based on the following indicators:
1) Physical condition of the person (weight, gender, age, height).
2) Injection sites.
3) Depending on the concentration and composition of the medication.

Brand: PREMIER-MED/PM
Single-use injection syringe, three-part, sterile insulin syringe with a Luer tip, capacity of 1 ml, graduated scale of 100 units, with a single-use injection needle.
TU 32.50.13-001-25587590-2018, manufactured by LLC "PREMIER-MED", Russia

Characteristics:
• Sterile, non-toxic, apyrogenic.
• Single-use.
• Three-part.
• Conical connection of the cylinder with the injection needle - Luer type.
• Luer-lock position (cylinder cone) of the syringe - concentric.
• Finger grips on the cylinder and piston with anti-slip texture.
• Clear, indelible graduation.
• Needle 26G x 1/2" (0.45 x 12 mm) - removable, pre-attached.
• The needle tip is sharpened in three planes (laser three-level sharpening), ensuring a predominance of the piercing effect over the cutting effect during tissue penetration.
• Minimal force required for penetration.
• Longitudinal resistance to bending (elasticity).
• Strength and stability of the connection with the syringe.
• Syringe volume: 1 ml.
• Scale division: 0.02.
• The stop ring prevents accidental withdrawal of the piston from the cylinder.
• The piston does not contain natural latex, eliminating the risk of allergic reactions.
• Individual sterile blister packaging - dense gas-permeable paper and transparent thermoformable film.
• The total capacity of the syringe exceeds the nominal capacity by at least 10%.
• Transparent cylinder facilitates control of volume and clarity of the medication.
• Individual packaging ensures the preservation of sterility.

Insulin Syringe 1 ml 100 units/ED with 26g needle (0.45 x 12 mm) 100 pcs/box/premier-med - is a medical device used for insulin injections. The sterile injection syringe comes in individual packaging and is intended for single use. It is made from high-quality and safe material. U-100 scale. The 26G needle (0.45 mm x 12 mm) is removable and attached to the syringe. The needle does not damage tissues during insertion due to a special lubricating coating. The conical connection of the cylinder with the injection needle is of the Luer type. The position of the Luer fitting (cylinder cone) of the syringe is concentric. Clear, non-washable graduations. The transparent cylinder facilitates control of the volume and clarity of the medication. The volume of the syringe is 1 ml. The scale division is 0.02. The syringes have high accuracy and allow for precise dosage control. Individual packaging ensures the preservation of sterility. The piston does not contain natural latex, eliminating the risk of allergic reactions. Three-component insulin syringes are a reliable and convenient tool for performing medical procedures at home or in medical institutions.