Satellite Plus Test Strips 25 pcs.

To determine the glucose level in human capillary blood.
Test strips "Satellite Plus" are used only with the "Satellite Plus" Glucometer.

Instructions
Only fresh capillary blood is suitable for testing.
Check the expiration date of the test strips.
Code entry:
A message will appear on the new device indicating the need to enter a code.
Insert the code strip from the supplied kit into the device's slot.
Compare the code, consisting of three digits, that appears on the screen with the code on the test strip packaging - if they do not match, measurement cannot be performed.
Press and release the button three times. The screen will turn off. The entered code is saved in the device's memory.
Conducting the measurement:
Tear the edge of the test strip blister and remove part of the packaging in the area of the contacts.
Holding the remaining part of the packaging and not touching the strip itself with your fingers, insert the test strip into the "Satellite Plus" glucometer.
Place the device on a flat surface.
Press and release the control key on the glucometer.
A code consisting of three digits stored in the device's memory will appear on the screen.
Press and release the button. The screen will display the digits "88.8", the device is ready for measurement.
Prick the fingertip with a sterile individual lancing device.
Apply pressure to the finger to obtain a drop of blood and place it on the working area of the strip so that the drop covers the entire working area.
The device will detect the drop of blood, count down 20 seconds, and display the reading on the screen.
Remove the used strip from the device and dispose of it.
Turn off the glucometer by pressing the button.

Main enzyme - glucose oxidase

Store in a dry place
Store in a light-protected place
Keep out of reach of children

The "Satellite Plus" test strips are designed to determine the concentration of glucose levels in human whole blood.
WARNING!!! The "Satellite Plus" test strips are intended for use ONLY with the "Satellite Plus" Glucometer!

CHARACTERISTICS
Strips are individually packaged, with an expiration date and strip code printed on the packaging.
Blood volume - 4-5 µL
Measurement time 20 seconds.
Accuracy in applying the blood drop to the strips is required.

• Measurement range from 0.6 to 35.0 mmol/L
• Measurement principle is electrochemical
• Calibration of measurements based on whole capillary blood
• Storage temperature from -20 °C to +30 °C
• Operating temperature from +18 °C to +35 °C
• Shelf life 24 months.
Each test strip is intended for single use only. Do not reuse.

Special conditions
Do not use test strips after the expiration date indicated on the packaging.
Do not bend, cut, or deform the test strips.
Package contents: Test strips for the "Satellite Plus" Glucometer - 25 pieces in individual packaging.
Calibration strip included.

Satellite Plus test strips are designed for the quick and easy determination of glucose levels in the blood. The package contains 25 disposable strips that are easy to use and provide high measurement accuracy. This test can be performed both at home and in laboratory conditions, and the results obtained can be used to monitor blood sugar levels and adjust dietary intake. Satellite Plus test strips are intended for use only with the Satellite Plus glucometer.

Store the test strips in a dry, cool place at a temperature between -20 °C and +30 °C, away from direct sunlight and heat sources. Do not freeze. Avoid contamination of the test area of the test strip with dirt or food.