Satellite test strips 50 pcs.

To determine the glucose level in human capillary blood.
"Satellite" strips are used only with the "Satellite" glucometer.

Instructions
Only fresh capillary blood is suitable for testing.
Check the expiration date of the test strips.
Tear the edges of the test strip packaging and remove part of the packaging in the area of the contacts, holding the remaining part of the packaging and avoiding touching the strip itself, insert the test strip into the "Satellite" glucometer.
Place the device on a flat surface.
Press and release the glucometer button; a five-digit code stored in the device's memory will appear on the screen.

Attention! Measurement is not permissible if the codes do not match.
If the code in the glucometer's memory does not match the code indicated on the individual packaging of the test strips, it is necessary to enter the code specified on the individual packaging of the test strips into the glucometer.
Press and release the button. The numbers 88.8 will appear on the screen. The glucometer is ready for measurement.
Prick the fingertip with a sterile individual lancing device.
Apply pressure to the finger to obtain a drop of blood and place it on the working area of the strip so that the drop covers the entire working area.
The device will detect the drop of blood, count down 40 seconds, and display the reading on the screen.
Remove the used strip from the device.
Turn off the glucometer by pressing the button.

Active enzyme - glucose oxidase.

Store in a dry place
Store in a light-protected place
Keep out of reach of children

The "Satellite" test strips are designed to determine the concentration of glucose levels in human whole blood.

ATTENTION!!! The "Satellite" test strips are intended ONLY for the "Satellite" Glucometer!

CHARACTERISTICS
Strips are individually packaged, with the expiration date and strip code printed on the packaging.
Blood volume - 4-5 µl
Measurement time 40 seconds.
Accuracy in applying the blood drop to the strips is required.

• Measurement range from 1.8 to 35.0 mmol/L
• Measurement principle is electrochemical
• Calibration of measurements based on whole capillary blood
• Storage temperature from -20 °C to +30 °C
• Operating temperature from +18 °C to +30 °C
• Shelf life 24 months.

Each test strip is intended for single use only. Do not reuse them.

Special conditions
Do not use test strips after the expiration date indicated on the packaging.
Do not bend, cut, or deform the test strips.

Storage conditions
Store the test strips in a dry, cool place at a temperature between -20°C and +30°C, away from direct sunlight and heat sources. Do not freeze. Avoid contamination of the test area of the test strips with dirt or food.