Syringe 10 ml disposable three-part sterile with needle 21g 0.8x38 mm 1 pc.

Three-component disposable syringes are intended for the injection of medicinal products, for slow bolus infusions, and for precise dosing of medications in anesthesiology and intensive care.

1. Before use, check the expiration date of the syringe indicated on the packaging and the integrity of the consumer packaging. Do not use after the expiration date or if the medical syringe packaging is compromised. Sterile until opened.
2. Open the individual packaging of the syringe. Remove the syringe.
3. Hold the syringe and remove the protective cap from the needle.
4. Holding the cylindrical body, gently pull the plunger of the syringe to draw the required volume of the medication.
5. Raise the syringe and gently push the plunger to expel air.
6. If air bubbles remain in the syringe cylinder, remove them by lightly tapping the cylinder with your finger while holding the syringe with the tip facing up.
7. Remove any remaining air from the cylinder and connector with an additional smooth forward movement of the plunger.
8. Thoroughly disinfect the skin at the injection site with a swab soaked in disinfectant solution.
9. Administer the medication according to the instructions.
10. After the injection, press the puncture site with a swab soaked in disinfectant solution, cover the needle with the cap. Dispose of the syringe. Be cautious of accidental puncture with the used needle.

Material composition:
Body, piston: transparent medical-grade polypropylene
Sealing element: medical rubber
Lubricant: silicone oil
Piston seal contains latex
Needle characteristics:
high-strength medical-grade stainless steel, laser sharpening, three-sided processing, ultrasonic cleaning, silicone coating.

No absolute contraindications for the use of the injection syringe have been identified, except in cases of individual intolerance to the components of the product.

Sites for safe intramuscular injections: upper outer quadrant of the buttock, middle third of the anterolateral surface of the thigh, and upper third of the outer surface of the arm.
The correct choice of needle length and thickness is an important and significant factor in intramuscular, subcutaneous, or intravenous administration of medications. The size of the needle is selected based on the following indicators:
1) Physical condition of the person (weight, gender, age, height).
2) Injection sites.
3) Depending on the concentration and composition of the medication.

Syringe for injection manufactured by Beijing Fornurse Medical Equipment Co., Ltd, China.
Syringe for injection 10 ml
Sterile
Single-use three-component
Needle 21G x 1 1/2 (0.8 x 38) - removable, fitted on the syringe
The needle features a three-faceted laser sharpening of the tip, ensuring easy and comfortable tissue penetration.
Connection of the syringe to the needle - Luer type
Position of the Luer fitting (cylinder cone) of the syringe - concentric (coaxial), with the cone positioned at the center of the cylinder
The thin-walled design of the needle allows for comfortable administration of viscous and oily medications
The surface of the needle becomes smooth as a result of polishing and grinding, as well as coating with a special lubricant. The needle does not damage tissues upon insertion
The scale is graduated up to 10 ml
Graduation is universal, black in color, and indelible.
The stop ring prevents accidental withdrawal of the plunger from the cylinder and leakage of medication for intramuscular injections
The plunger does not contain natural latex, eliminating the risk of allergic reactions
Packaging - individual, polymer.
STERILE! APYROGENIC! NON-TOXIC! SINGLE USE! Sterilized with ethylene oxide.

Single-use three-part syringe, with a volume of 10 ml and equipped with a 21G needle (diameter 0.8 mm, length 38 mm). The needle features a three-faceted laser sharpening of the tip, ensuring easy and comfortable tissue penetration. The needle is detachable and mounted on the syringe. Made from high-quality materials, sterile, and intended for subcutaneous, intramuscular, and intravenous injections. The plunger does not contain natural latex, eliminating the risk of allergic reactions. Packaging - individual, polymer. STERILE! Sterilized with ethylene oxide. For use in medical institutions and at home. 1 piece per package.