Syringe 20 ml disposable three-part sterile with needle 21g 0.8x38 mm 1 pc.

Three-component disposable syringes are intended for the injection of medicinal products, for slow bolus infusions, and for precise dosing of medications in anesthesiology and intensive care.

1. Before use, check the expiration date of the syringe indicated on the packaging and the integrity of the consumer packaging. Do not use after the expiration date or if the medical syringe packaging is compromised. Sterile until opened.
2. Open the individual packaging of the syringe. Remove the syringe.
3. Hold the syringe and remove the protective cap from the needle.
4. Holding the cylindrical body, gently pull the plunger of the syringe to draw the required volume of the medication.
5. Raise the syringe and gently push the plunger to expel the air.
6. If air bubbles remain in the cylinder of the syringe, remove them by lightly tapping the cylinder with your finger while holding the syringe with the tip facing up.
7. Remove any remaining air from the cylinder and connector with an additional smooth forward movement of the plunger.
8. Thoroughly disinfect the skin at the injection site with a swab soaked in disinfectant solution.
9. Administer the medication according to the instructions.
10. After the injection, press the puncture site with a swab soaked in disinfectant solution, cover the needle with the cap. Dispose of the syringe. Be cautious of accidental needle stick injuries from the used needle.

Material of manufacture:
Body, piston: transparent medical-grade polypropylene
Seal: rubber compound.
Lubricant: silicone oil
Piston seal contains latex
Needle characteristics:
high-strength medical-grade stainless steel, laser sharpening, three-sided processing, ultrasonic cleaning, silicone coating.

Three-component disposable syringes are intended for the injection of medicinal products, for slow bolus infusions, and for precise dosing of medications in anesthesiology and intensive care.

Sites for safe intramuscular injections: upper outer quadrant of the buttock, middle third of the anterolateral surface of the thigh, and upper third of the outer surface of the arm.
Choosing the correct length and thickness of the needle is an important and significant factor when administering medications intramuscularly, subcutaneously, or intravenously. The size of the needle is selected based on the following indicators:
1) Physical condition of the person (weight, gender, age, height).
2) Injection sites.
3) Depending on the concentration and composition of the medication.

Syringe for injection, manufacturer Beijing Fornurse Medical Equipment Co., Ltd, China.
Syringe for injection 20 ml
Sterile
Single-use three-component
Needle 21G x 1 1/2 (0.8 x 38) - removable, attached to the syringe
The needle features a three-faceted laser sharpening of the tip, ensuring easy and comfortable tissue penetration.
Connection of the syringe to the needle - Luer type
Position of the Luer fitting (cylinder cone) of the syringe - eccentric, with the cone offset to the side of the cylinder
The thin-walled design of the needle allows for comfortable administration of thick and oily medications
The surface of the needle becomes smooth as a result of polishing and grinding, as well as coating with a special lubricant. The needle does not damage tissues upon insertion
The scale is graduated up to 20 ml
Graduation is universal, black in color, and indelible.
The stop ring prevents accidental withdrawal of the piston from the cylinder and leakage of medication for intramuscular injections
The piston does not contain natural latex, eliminating the risk of allergic reactions
Packaging - individual, polymer.
STERILE! APYROGENIC! NON-TOXIC! SINGLE USE! Sterilized with ethylene oxide.

The 20 ml disposable syringe is designed for injections. It is equipped with a 21G needle (0.8x38 mm), allowing for procedures with high precision and minimal tissue trauma. The syringe is made from high-quality material, ensuring its safety and hygiene. Easy to use and convenient to store, this syringe will be an indispensable assistant in injection treatment and diagnostic procedures. It is packaged in an individual pouch, ensuring the preservation of sterility until the moment of use.