Syringe 2 ml injection with needle 0.60x32 mm (23g x 1 1/4) 100 pcs.

Intended for intradermal, subcutaneous, intramuscular, intravenous injection, for the administration of liquids (solutions of medicinal products) / gases (e.g., medical oxygen, nitrous oxide) into a medical device (e.g., catheter, infusion system). The devices may be used for various medical purposes. Indications for use depend on the purpose of medical application and are determined by the physician's prescription.

Instructions for Use
1. Before use, check the expiration date of the syringe indicated on the packaging and the integrity of the consumer packaging. Do not use after the expiration date or if the packaging is damaged. Sterile until opened.
2. Remove the syringe from the packaging and take off the protective cap from the needle.
3. Draw the medication into the syringe and prepare it for injection: ensure there are no air bubbles in the cylinder by holding the syringe vertically with the needle facing up, tapping the cylinder with the free hand, and expelling a small amount of the medication by pressing the plunger. Use the syringe immediately after filling.
4. Thoroughly disinfect the skin at the injection site with a swab soaked in disinfectant solution.
5. Puncture the skin at the injection site with the needle and inject the medication.
6. After the injection, apply pressure to the puncture site with a swab soaked in disinfectant solution.

Dispose of the syringe in accordance with SanPiN requirements.
Do not replace the protective cap on the needle after injection to avoid accidental needle stick injury.
Beware of accidental needle stick injury from used needles.
Do not use after the expiration date.

Cylinder and piston material - medical polypropylene
Piston seal (gasket): rubber, contains latex.

Individual intolerance to the materials of the product

Safety measures:

• there should be no lint when opening the packaging to ensure additional safety during drug administration;

• visually check the integrity of the container;

• using a syringe from damaged consumer packaging is prohibited

SYRINGE 2ML INJECTION WITH ATTACHED NEEDLE 0.60X32MM (23G X 1 1/4") - sterile, single-use, three-component, supplied in a hermetically sealed sterile package that is easy to open.

• Transparent cylinder with a non-erasable clear scale - allows for monitoring the absence of air bubbles and visually assessing the condition of the medication during administration.
• Syringe volume 2 ml
• Accurate graduation on the syringe - enables easy reading of measurements.
• The scale is graduated up to 2 ml. Scale division step - 0.2 ml
• The cuff on the piston - prevents medication loss and ensures smooth piston movement within the cylinder.
• Double stop ring prevents accidental withdrawal of the piston from the cylinder and leakage of medication during the drawing of the drug.
• The shape and size of the flange around the cylinder - provide convenience and reliability in gripping and holding the syringe during use.
• Needle 0.6 x 32 mm (23G X 1 1/4") - detachable, made of high-quality medical stainless steel, features a three-faceted laser sharpening, polishing, and silicone coating to reduce pain and trauma during injection.
• The needle has a thin-walled design, which facilitates the comfortable administration of liquid medications and allows for the comfortable injection of thick and oily drugs.
• Connection of the syringe to the needle - Luer-slip type.
• Position of the Luer fitting (cone of the cylinder) of the syringe - concentric, meaning the tip is centered within the cylinder.
• Individual packaging - polybag type, ensures easier opening of the package, preservation of sterility, and integrity of the syringe.
• Manufacturer: Vansun Medical Equipment (Fujian) Co., Ltd.
• Country of origin: China
• Shelf life: 5 years.