Syringe 50 ml injection with needle 1.20x38 mm (18g x 1.5") 20 pcs.

Intended for the introduction of fluids (solutions of medicinal products) / gases (e.g., medical oxygen, nitrous oxide) into a medical device (e.g., catheter, infusion system), as well as for the aspiration of various fluids from the body and flushing of internal cavities, introduction of nutrient media, irrigation of wounds with aseptic solutions. The products can be used for various medical purposes. Indications for use depend on the purpose of medical application and are determined by the physician's prescription.

Instructions for Use
1. Before use, check the expiration date of the syringe indicated on the packaging and the integrity of the consumer packaging. Do not use after the expiration date or if the packaging is damaged. Sterile until opened.
2. Remove the syringe from the packaging and take off the protective cap from the needle.
3. Use the syringe in accordance with the SOP (algorithm) of the medical procedure being performed. Use the syringe immediately after opening.
4. If suctioning fluids from body cavities is necessary, begin suctioning after removing the syringe from the packaging.
5. If flushing body cavities is necessary, begin flushing after filling the syringe with the flushing solution.
6. After the procedure, dispose of the syringe in accordance with SanPiN requirements.

Do not replace the protective cap on the needle after injection to avoid accidental needle stick injury.
Beware of accidental needle stick injury from used needles. Do not use after the expiration date.

Cylinder and piston material - medical polypropylene
Piston seal (gasket): rubber, contains latex
Needle 18G/1.2mm x 38mm
Protective cap

Individual intolerance to the materials of the product.

Safety measures:

• there should be no lint when opening the package to ensure additional safety during drug administration;

• visually check the integrity of the container;

• using a syringe from damaged consumer packaging is prohibited.

50ML INJECTION SYRINGE WITH ATTACHED NEEDLE 1.20X38MM (18G X 1 1/2") - sterile, single-use, three-component, supplied in a hermetically sealed sterile package that is easy to open.

• Transparent cylinder with a non-erasable clear scale - allows for monitoring the absence of air bubbles and visually assessing the condition of the medication during administration.
• Syringe volume: 50 ml
• Accurate graduation on the syringe - enables easy reading of measurements.
• The scale is graduated up to 50 ml. Scale division step: 5 ml
• Piston cuff - prevents medication loss and ensures smooth piston movement within the cylinder.
• Double stop ring prevents accidental withdrawal of the piston from the cylinder and leakage of medication during the filling process.
• The shape and size of the flange around the cylinder - provide comfort and reliability in gripping and holding the syringe during use.
• Needle 1.2x38 (18G x 1 1/2") - detachable, made of high-quality medical stainless steel, features a three-facet laser sharpening, polishing, and silicone coating to reduce pain and trauma during injection.
• The needle has a thin-walled design, which facilitates the comfortable administration of liquid medications and allows for the comfortable injection of thick and oily medications.
• Syringe-needle connection - Luer-slip type.
• Position of the Luer fitting (cone of the cylinder) of the syringe - eccentric, meaning the tip is offset to the side of the cylinder.
• Individual packaging - polybag type, provides easier opening of the package, maintaining the sterility and integrity of the syringe.
• Manufacturer: Vansun Medical Equipment (Fujian) Co., Ltd.
• Country of origin: China
• Shelf life: 5 years.