Syringe 2 ml 2-component 2 a luer with needle 0.6x30 100 pcs.

Intended for subcutaneous, intramuscular, and intravenous administration of medications, as well as for the aspiration of various fluids from the body or medical device for various applications.

1. Visually inspect the integrity of the consumer packaging.
2. Ensure the expiration date of the syringe is valid.
3. Open the consumer packaging and remove the syringe.
4. Firmly attach the needle to the syringe cone if it is not already attached.
5. Check the tightness of the needle connection.
6. Adjust the position of the plunger to the zero mark.
7. Remove the protective cap from the needle.
8. Draw the medication into the syringe according to the physician's instructions.
9. Hold the syringe vertically, with the needle pointing up, and expel air bubbles by pressing on the plunger.
10. Administer the injection.
11. After the injection, apply a disinfectant-soaked cotton ball to the injection site and cover the needle with the cap. Be cautious of accidental needle stick injuries from the used needle.
12. Dispose of the syringe in accordance with the requirements of SanPiN 2.1.7.2790-10.

Material of manufacture:
Cylinder: medical polypropylene intended for the production of two-component syringes
Piston: high-density polyethylene
Piston seal: absent
Lubricant: sliding additive contained in polypropylene
Sterilization: ethylene oxide.

Individual intolerance to the materials of the product.

Sites for safe intramuscular injections:
upper outer quadrant of the thigh and buttock
Attention!
Proper selection of needle size (diameter and length) will ensure comfortable and effective administration of the medication into the muscle tissue.

Brand MEDPROM Production - disposable medical syringes.
Injection syringe, two-part, 2 ml (2A) Luer
- Sterile
- Disposable
- Two-component
Needle 23G (0.6x30mm) - removable, fitted onto the syringe
- The injection needle has a three-faceted tip design, ensuring easy and comfortable tissue penetration
- Connection of the syringe to the needle - Luer slip type
- Position of the Luer fitting (cone of the cylinder) of the syringe - concentric, i.e., the tip-cone is centered in the syringe cylinder
- Syringe volume 2 ml
- The scale is graduated up to 2 ml (scale division value 0.1 ml)
- The total capacity of the syringe slightly exceeds the nominal volume (by at least 10%)
- Two stop rings prevent accidental withdrawal of the plunger from the cylinder and leakage of the medication
- Transparent cylinder facilitates control of the volume and clarity of the medication
- Packaging - blister
- Individual packaging ensures the preservation of sterility.

The two-component syringe (2-A) Luer, with a volume of 2 ml, is a medical device used for injections. The sterile injection syringe comes in individual packaging and is intended for single use. It is made from high-quality and safe material. The 23G (0.6x30 mm) needle is detachable and mounted on the syringe. The needle does not damage tissues during insertion due to a special lubrication coating. The transparent cylinder facilitates the control of the volume and clarity of the medication. The total capacity of the syringe slightly exceeds the nominal volume. The syringes have high accuracy and allow for precise dosage control. Individual packaging ensures the preservation of sterility. Three-component syringes are a reliable and convenient tool for performing medical procedures at home or in medical facilities.