Syringe 10 ml two-part 10 pcs luer with needle 0.8x40

Intended for subcutaneous, intramuscular, and intravenous administration of medications, as well as for the aspiration of various fluids from the body or medical device for various applications.

1. Visually inspect the integrity of the consumer packaging.
2. Ensure the expiration date of the syringe is valid.
3. Open the consumer packaging and remove the syringe.
4. Firmly attach the needle to the syringe cone if it is not already attached.
5. Check the tightness of the needle connection.
6. Adjust the position of the plunger to the zero mark.
7. Remove the protective cap from the needle.
8. Draw the medication into the syringe according to the physician's instructions.
9. Hold the syringe vertically, with the needle pointing up, and expel air bubbles by pressing on the plunger.
10. Administer the injection.
11. After the injection, dispose of the syringe in accordance with the requirements of SanPiN 2.1.7.2790-10.

Material composition:
Cylinder: medical polypropylene intended for the manufacture of two-component syringes
Piston: high-density polyethylene, dye 161515-C (blue)
Piston seal: absent
Lubrication: sliding additive contained in polypropylene
Sterilization with ethylene oxide

Individual intolerance to the materials of the product

Sites for safe intramuscular injections:
upper outer quadrant of the thigh and buttock
Attention!
Proper selection of needle size (diameter and length) will ensure comfortable and effective administration of the medication into the muscle tissue.
Safety measures
1. For single use only.
2. It is prohibited to use the syringe if the integrity of the consumer packaging is compromised or if it is expired, as well as if the protective cap is not placed on the needle; in this case, the syringe must be disposed of.
3. Re-sterilization of the syringe is prohibited.
4. It is prohibited to administer injections to multiple patients with the same syringe, changing only the needles, as well as to reuse the syringe.
5. It is prohibited to use if any part of the syringe is detached, damaged, or contaminated.
6. Sterile single-use injection syringes in the manufacturer's packaging should be stored at a temperature of +5 to +40°C and relative humidity not exceeding 80%.
7. Administer injections only according to the physician's instructions.
8. Strictly adhere to the requirements of SanPiN 2.1.7.2790-10 regarding the disposal of syringes.
Attention! Beware of injury from used instruments.

Brand MEDPROM Production - disposable medical syringes.

Injection syringe, two-part, 10 ml (10 B) Luer
-Sterile
-Disposable
-Two-component

Needle 21G (0.8x40mm) - removable, fitted on the syringe
-The injection needle has a three-faceted tip that ensures easy and comfortable tissue penetration
-The connection between the syringe and the needle is of the Luer slip type
-The position of the Luer fitting (cone of the cylinder) of the syringe is eccentric, meaning the tip-cone is located on the side of the syringe cylinder
-Syringe volume is 10 ml
-The scale is graduated up to 10 ml (scale division value is 0.5 ml)
-The total capacity of the syringe slightly exceeds the nominal volume (by at least 10%)
-Two stop rings prevent accidental withdrawal of the plunger from the cylinder and leakage of the medication
-The transparent cylinder facilitates control of the volume and clarity of the medication
-Packaging - blister
-Individual packaging ensures the preservation of sterility

The two-part 10 ml syringe with a Luer connection and a needle diameter of 0.8 mm and length of 40 mm is a universal tool used in medical institutions and for home injections.

The syringe is made of high-quality plastic that does not interact with the administered medications. The connection of the syringe to the needle is of the Luer slip type. The position of the Luer fitting (cylinder cone) of the syringe is eccentric, meaning the tip-cone is located on the side of the syringe cylinder. The transparent cylinder facilitates the control of the volume and clarity of the medication.

The injection needle has a three-faceted sharpening of the tip, ensuring easy and comfortable tissue penetration. Individual packaging ensures the preservation of sterility.

Syringes are available in packs of 10, allowing for cost savings and the ability to purchase the necessary quantity for regular use.