2 ml two-part syringe with 0.6x30 needle 10 pcs.

Intended for subcutaneous, intramuscular, and intravenous administration of medicinal products, as well as for the aspiration of various fluids from the body or medical device for various applications.

1. Visually inspect the integrity of the consumer packaging.
2. Ensure the expiration date of the syringe is valid.
3. Open the consumer packaging and remove the syringe.
4. Firmly attach the needle to the syringe cone if it is not already attached.
5. Check the tightness of the needle connection.
6. Adjust the position of the plunger to the zero mark.
7. Remove the protective cap from the needle.
8. Draw the medication into the syringe according to the physician's instructions.
9. Hold the syringe vertically, with the needle pointing up, and expel air bubbles by pressing on the plunger.
10. Administer the injection.
11. After the injection, apply a disinfectant-soaked cotton ball to the injection site and cover the needle with the cap. Be cautious of accidental needle stick injuries from the used needle.
12. Dispose of the syringe in accordance with the requirements of SanPiN 2.1.7.2790-10.

Material of manufacture:
Cylinder: medical polypropylene intended for the production of two-component syringes
Piston: high-density polyethylene
Piston seal: absent
Lubricant: sliding additive contained in polypropylene
Sterilization with ethylene oxide.

Individual intolerance to the materials of the product.

Sites for safe intramuscular injections:
upper outer quadrant of the thigh and buttock
Attention!
Proper selection of needle size (diameter and length) will ensure comfortable and effective administration of the medication into the muscle tissue.

Brand MEDPROM Production - disposable medical syringes.
Injection syringe, two-part, 2 ml (2A) Luer
- Sterile
- Disposable
- Two-component
Needle 23G (0.6x30mm) - removable, fitted onto the syringe
- The injection needle has a three-faceted tip design, ensuring easy and comfortable tissue penetration
- Connection of the syringe to the needle - Luer slip type
- Position of the Luer fitting (cone of the cylinder) of the syringe - concentric, i.e., the tip-cone is centered in the syringe cylinder
- Syringe volume 2 ml
- The scale is graduated up to 2 ml (scale division value 0.1 ml)
- The total capacity of the syringe slightly exceeds the nominal volume (by at least 10%)
- Two stop rings prevent accidental withdrawal of the plunger from the cylinder and leakage of the medication
- Transparent cylinder facilitates control of the volume and clarity of the medication
- Packaging - blister
- Individual packaging ensures the preservation of sterility.

The two-part 2 ml syringe with a 0.6x30 mm needle (10 pcs.) is designed for the administration of medications and other liquid substances into the body. The syringe consists of two parts - a cylinder and a piston, ensuring precise and even dosing. The needle has a diameter of 0.6 mm and a length of 30 mm, allowing for injections in various body areas. The syringe is equipped with a Luer Lock connection, providing secure needle fixation and preventing accidental dislodgment during use. The package contains 10 single-use syringes.